Furnace Control Corp has just set the NEW STANDARD for furnace atmosphere measurements.
 |
Easy To Use Program Editor  |
Six Pen Trend Chart  |
Specifications
CO2 |
CO |
CH4 |
|
| Ranges: | (0-1%) |
(0-30%) |
0-10% or 30%) |
| Resolution: | (10ppm) |
(0.02%) |
(0-02%) |
| Accuracy: | 2% of gas Range |
| Stability: | <+/-2% over 12 months |
| Repeatability: | Zero +/-0.3%, Span +/-1.5% |
Electrical: |
120-240 Volts AC 50-60 Hz 150 watts |
| Humidity: | 0-100% non-condensing |
Features
- Fully programmable 3 loop controller
- 200 process recipes
- Easy to use operator touch screen interface
- Built in 3 gas I/R can operate with oxygen probes or independently compute %C from 3 gas analysis
- Easy to use recipe programmer
- Automatic I/R self-calibration
- Industry standard ModBus protocol for data acquisition
- Built in trending
- Easy to read English text alarms
Benefits
- Accurate calculation of atmosphere carbon potential
- Control of furnace temperature, atmosphere, and oil temperature
- Alarms for out of band conditions on any process variable
- Up to 16 discrete event outputs for control of furnace motion, or process selection such as ammonia additions
- Built in probe care functions
- System is able to control atmosphere with or without O2 probe
Click Here to Download Printable Brochure
Click Here to find a Furnace Control Corp Representative near you
