The Accucarb Oxygen Probe is a high accuracy zirconia oxygen sensor designed for the heat treating industry developed by Furnace Control Corp.
COMBUSTION APPLICATIONS
ACCUCARB® Oxygen Probe is a patented, ceramic sheathed, high temperature oxygen probe, specifically designed for atmospheres containing free oxygen, such as combustion, incinerator or kiln applications.
 |
Patented Woven Refractory Sleeve |
MAXIMIZE COMBUSTION EFFICIENCY
- Reduce excess oxygen improving combustion efficiency.
- real time correction of trim air
REDUCE EMISSIONS
- Reduction in excess air yields reduced NOx production
Special Features ---
- In-situ measurement of oxygen in you combustion process.
- Fast response time, less than 5 seconds
- Nextel sleeve to extend life
- Type K sheathed thermocouple standard at no charge. Types B, S or R are Available
- Adjustable probe length allows one probe to fit ALL applications. This reduces your replacement parts inventory.
- Any one-inch NPT pipe thread can be used to mount the probe.
Specifications
- Normal probe operating temperature is 800-2500 deg F
- Sensitivity +/- 0.1mv
- Accuracy +/- 1.0mv
- Stability +/- 1mv over probe life
- Impedance less than 4000 ohms
Probe Construction
Stabilized Zirconia solid electrolyte. High purity alumina sheath. Pt-Rh alloy electrode. Patented woven refractory sleeve
Accucarb Oxygen Probe has a life of about 2 years with normal use.
**Accucarb is a registered trademark of Furnace Control Corp
Click Here to find a Furnace Control Corp Representative near you
